| Issue |
E3S Web Conf.
Volume 446, 2023
2nd International Conference on High-Speed Transport Development (HSTD 2023)
|
|
|---|---|---|
| Article Number | 02001 | |
| Number of page(s) | 6 | |
| Section | Powerplant, Systems and Equipment | |
| DOI | https://doi.org/10.1051/e3sconf/202344602001 | |
| Published online | 10 November 2023 | |
Design of an External Centrifugal Fan for the Cooling System of an Electrical Machine
Ufa University of Science and Technology, Ufa, Russia
* Corresponding author: pronin.ea@ugatu.su
Air cooling systems for electrical machines still do not lose their relevance. Especially noteworthy here is the aviation industry, in which special attention is paid to the weight and size of all systems, as well as the high density of equipment layout, which can interfere with the implementation of other types of cooling. At such times, only air cooling can be used to ensure the optimum operating temperature of the electrical machine. This article presents a research work on the profiling of blades for an external centrifugal fan of the air-cooling system of an electrical machine. The study is based on 3D numerical calculations using computational fluid dynamics software. Based on the results obtained, a design option was chosen that provides maximum performance.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.