Issue |
E3S Web of Conf.
Volume 452, 2023
XV International Online Conference “Improving Farming Productivity and Agroecology – Ecosystem Restoration” (IPFA 2023)
|
|
---|---|---|
Article Number | 05015 | |
Number of page(s) | 7 | |
Section | Ecological Restoration Management and Green | |
DOI | https://doi.org/10.1051/e3sconf/202345205015 | |
Published online | 30 November 2023 |
Co-Cr alloys for biocompatible medical products
1 Science and Technology Park of BNTU “Polytechnic”, Minsk, Belarus
2 Fergana Medical Institute of Public Health, Fergana, Uzbekistan
* Corresponding author: arsif@mail.ru
The results of the analysis of the Co-Cr alloys properties for biocompatible medical products are presented. The article shows that alloys of the Co-Cr system doped with molybdenum are mainly used as the main materials for the manufacture of orthopedic and dental implants, alloys of the Co-Cr-W system are promising for the manufacture of coronary and vascular small-sized stents with high radial rigidity of the structure. Ensuring the corrosion resistance of the material is one of the general requirements for implants of the Co-Cr alloys. The main influence on the corrosion resistance, biocompatibility and mechanical properties of coronary and vascular implants subjected to increased cyclic loads is exerted by the state and structure of the surface of the Co-Cr alloy. Effective ways to change the surface structure and improve the properties of Co-Cr alloys are heat treatment processes, including those in vacuum, mechanical and electrochemical methods of surface treatment.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.