Issue |
E3S Web of Conf.
Volume 452, 2023
XV International Online Conference “Improving Farming Productivity and Agroecology – Ecosystem Restoration” (IPFA 2023)
|
|
---|---|---|
Article Number | 06029 | |
Number of page(s) | 7 | |
Section | Energy-Efficient Construction and Renovation | |
DOI | https://doi.org/10.1051/e3sconf/202345206029 | |
Published online | 30 November 2023 |
Dose assessment for radon and thoron concentrations in iraqi thermostone bricks
1 University of Kufa, Faculty of Science, Physics Department, Al-Najaf, Iraq
2 Ministry of Education, General Directorate for Najaf Education, Najaf, Iraq
* Corresponding author: ali.alhameedawi@uokufa.edu.iq
This research aims to measure radon (222Rn) and thoron (220Rn) concentrations for selected thermostone bricks samples produced in Iraq. 222Rn and 220Rn concentrations were measured using the active method (RAD7 detector). Also, the inhalation dose for the year was calculated using the 222Rn and 220Rn concentrations. The results of this study indicated that the range of radon concentration values was between 8.00 Bq/m3 to 66.50 Bq/m3; its mean value was 28.22±3.89 Bq/m3. At the same time, the values of thoron concentrations ranged from 27.10 Bq/m3 to 129.00 Bq/m3, with a mean value of 55.46±7.15 Bq/m3. Also, the mean dose value associated with radon and thoron was 0.71±0.098 mSv/y and 0.31±0.039 mSv/y, respectively. According to preliminary research, the concentration of thoron in the current study was higher than that of radon except for two samples. In general, the values of doses from Iraqi thermostone brick samples were within the action level recommended by ICRP, 1993. Therefore, all samples in the present study didn't significantly affect the dose.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.