Issue |
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
|
|
---|---|---|
Article Number | 02003 | |
Number of page(s) | 10 | |
Section | Material Physics and Chemistry, Carbon Footprint of Materials | |
DOI | https://doi.org/10.1051/e3sconf/202345802003 | |
Published online | 07 December 2023 |
Method of digital automatic design of grinding operations carried out on CNC cylindrical grinding machines
South Ural State University (National Research University), Chelyabinsk, Russia
* Corresponding author: arni-frolov@mail.ru
Based on the literature review, the problem is formulated, which consists in the absence of detailed recommendations for the design of grinding operations for CNC cylindrical grinding machines. This paper provides a solution to the problem described above using the developed method, which includes: the formation of initial data, the formation of grinding cycles, and the calculated determination of cycle parameters.
Key words: automatic design / CNC cylindrical grinding machines / design method
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.