Issue |
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
|
|
---|---|---|
Article Number | 08024 | |
Number of page(s) | 10 | |
Section | Environmental Management and Protection | |
DOI | https://doi.org/10.1051/e3sconf/202345808024 | |
Published online | 07 December 2023 |
Algorithm for hydraulic system parameters of a dump truck
1 T.F. Gorbachev Kuzbass State Technical University, 28, Vesennaya str., Kemerovo, 650000, Russia
2 Bauman Moscow State Technical University, 2nd Baumanskaya St., 5, block. 1. Moscow, 105005, Russia
* Corresponding author: ddm.tm@kuzstu.ru
At the initial stage of designing a dump truck it is necessary to determine the main units and assemblies of the vehicle, their parameters and dimensions. One of the systems of the dump truck is the hydraulic system. When creating new dump trucks, there is a necessity to define parameters and characteristics of hydraulic system components. The peculiarity of quarry dump trucks, in contrast to dump trucks, which are used on public roads, is that the modes of their operation are different. Therefore, when creating new dump trucks, it is necessary to develop an algorithm for selecting and justifying the parameters of the hydraulic system at the early stages of design. The article substantiates the necessity of developing an algorithm for determining the parameters of the hydraulic system. The main hydraulic consumers are defined and the requirements of each of the consumers are presented. The algorithm of justification of the parameters of the hydraulic system of the quarry dump truck is described. Determination of the required pump capacity of the hydraulic system is described. The use of the described algorithm for justification of the hydraulic system parameters of the dump truck contributes to the reduction of terms of development of design documentation at the early stages of design.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.