| Issue |
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
|
|
|---|---|---|
| Article Number | 10004 | |
| Number of page(s) | 9 | |
| Section | Energy Engineering and Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202345810004 | |
| Published online | 07 December 2023 | |
Influence of the radius of the generatrix of flank surface on the geometric parameters of the cutting wedge of the twist drill
Moscow State Technological University Stankin, Cutting Tools and Machining Technologies - Lab Micromachining Technologies, 127055, Moscow, Russia
* Corresponding author: PMPivkin@gmail.com
Drills with various flank surface shapes are widely used to machine holes. Drill teeth have flank surfaces of various shapes, flat, conical and helical. In this work, we have investigated the influence of radius of the generatriх in the form of a circular arc on the geometric parameters of the cutting wedge. It has been found that the range of changes in the clearance and rake angles along the cutting edge decreases with the decreasing radius of generatrix forming rake. It was found that a tool with a minimum permissible radius of curvature has the best distribution of rake and clearance angles of the blade along the cutting edge . The improvement reaches up to 40% compared conical flank surface. It was also found that in the case, when the generatrix radius decreases, the cutting edge increases by 18% compared to conical flank surface, which reduces the stress along the entire cutting wedge.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.