| Issue |
E3S Web Conf.
Volume 459, 2023
XXXIX Siberian Thermophysical Seminar (STS-39)
|
|
|---|---|---|
| Article Number | 03001 | |
| Number of page(s) | 5 | |
| Section | Methods for Controlling Turbulence and Intensifying Heat and Mass Transfer | |
| DOI | https://doi.org/10.1051/e3sconf/202345903001 | |
| Published online | 04 December 2023 | |
Features of the flow structure in the boundary layer of a V-shaped flying wing model with controls and a distributed electric propulsion
Khristianovich Institute of Theoretical and Applied Mechanics of the Siberian Branch of the Russian Academy of Sciences, 4/1 Institutskaya Street, Novosibirsk, 630090, Russia
* Corresponding author: petrov1van2015@yandex.ru
The study was carried out on a model of a small-sized aircraft of the type of a flying wing, which has a V-shape in plan. The structure of the flow on the wing surface was studied depending on the angle of attack and deflection of the controls. Experiments were carried out to study the influence of the work of the distributed electric propulsion on the flow structure on the wing surface. As a result, flow patterns were obtained using the “soot-oil” visualization method for each flow regime.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.