Issue |
E3S Web Conf.
Volume 460, 2023
International Scientific Conference on Biotechnology and Food Technology (BFT-2023)
|
|
---|---|---|
Article Number | 04025 | |
Number of page(s) | 12 | |
Section | IoT, Big Data and AI in Food Industry | |
DOI | https://doi.org/10.1051/e3sconf/202346004025 | |
Published online | 11 December 2023 |
Software of information-measuring system for electric impedance tomography of biological objects
1 Platov South-Russian State Polytechnic University (NPI), 132 Prosveshcheniya St., Rostov region, Novocherkassk, Russian Federation
2 Le Quy Don Technical University, 236 Hoang Quoc Viet, Ha Noi, Viet Nam
This article describes the development of software for an electrical impedance tomography device that solves the problems of controlling the acquisition unit, primary processing and transmission of measurement data, their further processing on a personal computer, reconstruction, visualization and saving of results. Software modules are defined, algorithms for their functioning are developed, and their block diagrams are shown. An algorithm for the interaction of electrical impedance tomography device software modules with each other has been developed. A graphical interface for the device software has been developed. An algorithm for interaction with EIDORS software has been developed.Criteria for experimental testing of the functioning of the developed software have been developed, and possible errors in the operation of each module have been identified.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.