Issue |
E3S Web Conf.
Volume 460, 2023
International Scientific Conference on Biotechnology and Food Technology (BFT-2023)
|
|
---|---|---|
Article Number | 10004 | |
Number of page(s) | 9 | |
Section | Agricultural Engineering and Mechanization | |
DOI | https://doi.org/10.1051/e3sconf/202346010004 | |
Published online | 11 December 2023 |
Influence of racking equipment parameters on the capacity of a covered warehouse
1 Tashkent State Transport University, 100069 Tashkent, Uzbekistan
2 The Higher Military Aviation School the Republic of Uzbekistan, 180117 Qarshi, Uzbekistan
3 Berdakh Karakalpak State University, 230100 Nukus, Uzbekistan
* Corresponding author: ilesaliev@mail.ru
Warehouses located at cargo transfer points between different modes of transportation perform important functions in transforming cargo flows for further efficient transportation. When designing a warehouse for unit loads, the best method of cargo storage must be chosen, ensuring the fullest use of the warehouse area and minimal costs for moving cargo within the warehouse. Mathematical models have been proposed that establish relationships between individual parameters of a unit load warehouse. These models have been used to study the mutual influence of parameters on each other, as well as to determine the capacities of unit load warehouses.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.