| Issue |
E3S Web Conf.
Volume 460, 2023
International Scientific Conference on Biotechnology and Food Technology (BFT-2023)
|
|
|---|---|---|
| Article Number | 10027 | |
| Number of page(s) | 6 | |
| Section | Agricultural Engineering and Mechanization | |
| DOI | https://doi.org/10.1051/e3sconf/202346010027 | |
| Published online | 11 December 2023 | |
The influence of regulating the forces of the refiner disk when exposed to a fibrous semi-finished product in the production of composite materials
Reshetnev Siberian State University of Science and Technology, 660037 Krasnoyarsk, Russia
* Corresponding author: sanekvititnev@yandex.ru
The refining process is the most important and determines the dimensional and qualitative characteristics of the semifinished fibre product, respectively, and the physical and mechanical properties of the composite materials made of it. The present work presents the results of experimental studies carried out in conditions as close as possible to the industrial conditions of the refining process of fibrous semi-finished product in the production of composite materials such as wood-fibre boards, allowing to evaluate the effectiveness of the refining set for the preparation of wood fibre in disc mills at the regulation of the created forces in the refining process. The results of the planned and implemented multifactor experiment allowed to establish the influence of normal forces created by the design of the refiner disc at regulation of the working gap and concentration of wood fibre mass, as well as their paired interaction on the intensity of changes in the main size-quality characteristics of the fibrous semi-finished product (degree of refining, average length and diameter of fibres, the ratio of length to diameter of fibres) in the process of its preparation.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.