| Issue |
E3S Web Conf.
Volume 461, 2023
Rudenko International Conference “Methodological Problems in Reliability Study of Large Energy Systems“ (RSES 2023)
|
|
|---|---|---|
| Article Number | 01059 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/e3sconf/202346101059 | |
| Published online | 12 December 2023 | |
Control of modes of energy-saving vibro-drying devices
1 Tashkent State Technical University named after Islam Karimov, 100095, Uzbekistan, Tashkent, University St. 2A.
2 Karakalpak State University, 742012, Uzbekistan, Republic of Karakalpakstan, Nukus, Ch. Abdirova St. 1.
* Corresponding author: sh.sultanova@yahoo.com
This paper proposes a method for optimizing the drying process of pectin hydrolyzate in the vibrofluidized bed of inert material, which allows to determine the values of the parameters of the regime at which the drying process continues with minimal costs for thermal and heat. It is based on the experimentally obtained relationship between the specific productivity of the drying equipment and the following parameters of the drying process: air movement speed in the drying chamber, initial air temperature, specific load depending on the drying area, gas distribution network , the initial concentration of dry matter. A complex criterion for the optimization of the vibrofluidized drying process has been developed, its minimization allows to increase the efficiency of the drying process. Restrictions on the ranges of changing the parameters of the drying process have been developed.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.