| Issue |
E3S Web Conf.
Volume 461, 2023
Rudenko International Conference “Methodological Problems in Reliability Study of Large Energy Systems“ (RSES 2023)
|
|
|---|---|---|
| Article Number | 01096 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/202346101096 | |
| Published online | 12 December 2023 | |
Wear resistance analysis of HSS drill bits P6M5 and special round carbide drill bits VK8 for drilling alloyed steels and alloys
1 Tashkent state technical university, Tashkent, Uzbekistan
2 Almalyk branch of Tashkent state technical university, Almalyk, Uzbekistan
* Corresponding author: muhammadituronov434@gmail.com
This paper analyses tool life and accuracy of made holes. As a result of experiments, the revealed variation coefficients reach high values - k=0.61, which indicates significant instability of the machining process of holes. In order to verify this assumption, a series of test measurements of the geometry of the gauge plugs used in the workshop were taken.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.