Evaluation of integrated geological engineering reservoir reconstruction in Block X of Bozi

¹ Chengdu University of Technology, Chengdu, Sichuan 610059, China
² PetroChina Tarim Oilfield Company, Korla, Xinjiang 841000, China.
³ Chengdu Technology Sun Energy Technology Co. Ltd., Chengdu, Sichuan 610059, China

Abstract

The geological structure of the reservoir in Bozi-Dabei area is complex, and the longitudinal difference of rock mechanical properties of the reservoir is large. Most of the current evaluation techniques after reservoir reconstruction are based on the fitting of construction pressure based on the logging curve of a single well, so as to analyze the fracture morphology and the geometric dimensions of length, width and height after pressure. It is difficult to explain the fracture morphology and geometric parameters correctly because the interpretation methods used do not comprehensively consider the influence of natural fractures, 3D geological properties and 3D geomechanical properties. In order to explain the artificial fracture morphology more accurately, the target layer ant body is generated by using 3D original seismic data, and the natural fracture model of three different reservoir types in Bozi X block is generated, which provides geological basis for the integrated demonstration. By combining dynamic and static data and multidisciplinary methods, a one-dimensional rock mechanics profile model is established, and a three-dimensional geomechanical model of three different reservoir types in Block X of Bozi is established by combining geological model and deep diagenesis theory. The matching relationship between horizontal stress, fault strike and natural tensile fracture distribution is comprehensively analyzed and evaluated, providing a geomechanical basis for the evaluation of integrated reservoir reconstruction. Integrated geological model and geomechanical model are closely combined with engineering parameters to establish an integrated true three-dimensional artificial fracture model. On this basis, the optimization research and design of the parameters of displacement, liquid volume and sand ratio are completed. The optimal flow rate of Class I reservoir 6-7 (m³·min-1), Class II reservoir 5-6 (m³·min-1), Class III reservoir 4-5 (m³·min-1), Class I reservoir 600-700 m³, Class II reservoir 600-700 m³, Class III reservoir 500-600 m³, Sand ratio of 15%-20% for Class I reservoir, 15%-20% for class II reservoir and 20%-25% for class III reservoir are the optimal construction parameters, which provide guidance for field construction.