| Issue |
E3S Web Conf.
Volume 570, 2024
International Conference of Technology on Community and Environmental Development (ICTCED 2024)
|
|
|---|---|---|
| Article Number | 01008 | |
| Number of page(s) | 10 | |
| Section | Green Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202457001008 | |
| Published online | 18 September 2024 | |
Analysis, Design, Development, Implementation, and Evaluation of a Two-Leg Puller Set
1 Automotive Engineering Technology Department, 55183 Universitas Muhammadiyah Yogyakarta, Indonesia
2 Applied Mechanical and Automotive Engineering Department, 55281 Universitas Negeri Yogyakarta, Indonesia
* Corresponding author: rinasaanugrah@umy.ac.id
The two-legged puller set can reach various component diameters, so this tool is more flexible and has an innovative application by using an electric, pneumatic impact tool as the driver. This research is a research and development (R&D) study using the ADDIE approach (Analysis, Design, Development, Implementation, and Evaluation). The stages or process of making a 2-leg puller set are preparation, fabrication, assembly, finishing, and testing the function of the puller set on the bearing or pully components and seeing whether the function of the puller set is correct. The design was carried out using Computer Aided Design (CAD) software, and simulations were also carried out. The product is produced by opening the air compressor lever with a pressure ranging from 40-45 psi connected to a hose and impact tool. If it is greater than 45 psi, it will damage the screw bolt threads and will not be centred. If it is lower than 40 psi, the timing is slow and not working.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.