| Issue |
E3S Web Conf.
Volume 573, 2024
2024 International Conference on Sustainable Development and Energy Resources (SDER 2024)
|
|
|---|---|---|
| Article Number | 03020 | |
| Number of page(s) | 4 | |
| Section | Sustainable Development and Electricity Market Research | |
| DOI | https://doi.org/10.1051/e3sconf/202457303020 | |
| Published online | 30 September 2024 | |
Airport energy conservation and runway configuration
1 Aeronautical Study & Airport Simulation Department, China Airport Planning & Design Institute Co., Ltd., 100029 Beijing, China
2 Beijing Aeronautical Science and Technology Research Institute, Commercial Aircraft Corporation of China Ltd., Beijing, China
* Corresponding author: lixiong_cacc@163.com
Efficient ground operation of aircraft directly impacts airport's courses of energy conservation and green operation. Typical runway configurations used in large airport were classified and analyzed. Combining with flight ground operation, 2 methods of comparison and selection of carbon emission were proposed, which were based on taxiing distance and simulation respectively. In addition, above 2 methods were applied in large-sized airport runways configuration selection and taxiways optimization. Application results show that the method based on taxiing distance suits for rough estimation in the early stage of airport planning, the method based on simulation considering both ground taxiing and delay time suits for a more detailed study on airport planning.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.