Issue |
E3S Web Conf.
Volume 578, 2024
XL Siberian Thermophysical Seminar (STS-40)
|
|
---|---|---|
Article Number | 01042 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202457801042 | |
Published online | 14 October 2024 |
Study of the combustion process of liquid off-design fuel in a spray burner device with a controlled supply of primary air
Kutateladze Institute of Thermophysics SB RAS, 630090, 1 Lavrentiev Ave., Novosibirsk, Russia
* Corresponding author: sadkinvanya@mail.ru
This work studies the process of combustion of liquid off-design fuel (using waste oil as an example) in a jet of superheated water vapor in a spray burner device with a controlled supply of primary air. The average temperature along the vertical axis of the burner device was measured, the composition of intermediate and final combustion products, and heat release were studied when the parameters in the gas generation chamber were varied. It has been shown that changing the primary air flow rate when spraying liquid off-design fuel with a jet of superheated water vapor can additionally influence the flame structure and the level of emissions. And the technology itself can be used to create low-emission burner devices.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.