| Issue |
E3S Web Conf.
Volume 592, 2024
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2024)
|
|
|---|---|---|
| Article Number | 03030 | |
| Number of page(s) | 8 | |
| Section | Energy Production, Storage, and Distribution | |
| DOI | https://doi.org/10.1051/e3sconf/202459203030 | |
| Published online | 20 November 2024 | |
Research of error electromagnetic current-to-voltage converters with flat measuring windings in the recesses of the magnetic circuit
1 Tashkent Institute of Irrigation and Agricultural Mechanization Engineers National Research University, Tashkent, Uzbekistan
2 Tashkent University of Information Technologies named after Muhammad al-Khwarizmi, Tashkent, Uzbekistan
3 Namangan State University, Namangan, Uzbekistan
* Corresponding author: aaotemirov@gmail.com
There are many signal converters of the magnitude and parameters of direct and alternating current, but it is necessary to briefly review them to choose the optimal type of current converters for monitoring and control systems of energy sources in distributed telecommunication systems. advantages and disadvantages and evaluation of their development prospects and application in the hybrid system mentioned above. control of power supply sources. The most widely used electromechanical current converters in various flow monitoring and control systems have a simple and technological design, but they have a moving measurement part, which reduces their reliability and limits the scope of application.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.