| Issue |
E3S Web Conf.
Volume 486, 2024
IX International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-IX 2023)
|
|
|---|---|---|
| Article Number | 04001 | |
| Number of page(s) | 5 | |
| Section | Green Technologies, Climate Change and Environmental Safety and Pollution | |
| DOI | https://doi.org/10.1051/e3sconf/202448604001 | |
| Published online | 07 February 2024 | |
Evaluation of the influence of inhomogeneous inclusions on the stems bend of agricultural plants
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers (National Research University), Tashkent, Uzbekistan
* Corresponding author: yakubbay1963@gmail.com
The work is devoted to the study of the bending of cantilever rods in the presence of inclusions leading to a significant increase in the angles of rotation of the rod sections. The presence in the structure of the rod of sections that are inhomogeneous in stiffness and are not subject to bending, but having different lengths and numbers, leads to the need to develop models of bends, in contrast to the simplified equations known in the literature. An example of the calculation of bends and stiffness of the rod in the presence of inclusions of various lengths is given. The calculation was carried out in the direct calculation mode in the PC MatLAB system. The initial data were taken for corn stalks based on field and laboratory studies of limbs within elastic deformations. Analytical models for the rigidity of the rod are obtained, calculations and graphs of the bends of the rod are given.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.