Issue |
E3S Web Conf.
Volume 486, 2024
IX International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-IX 2023)
|
|
---|---|---|
Article Number | 05010 | |
Number of page(s) | 5 | |
Section | Chemical, Ecological, Oil-and-Gas Engineering and Natural Resources | |
DOI | https://doi.org/10.1051/e3sconf/202448605010 | |
Published online | 07 February 2024 |
Methods of obtaining activated adsorbents based on gossypol tar and local bentonites and analysis of their physical parameters
1 Kokand State Pedagogical Institute, Kokand, Uzbekistan
2 Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
* Corresponding author: muradullayevanazokat@gmail.com
This article provides information on the methods of obtaining activated adsorbents based on oil-oil waste gossypol tar and local benonites and their various physical properties. In addition, the effect of temperature change on the yield of activated adsorbents from gossypol resin was analyzed. As a result, when Logon bentonite is modified with activated gossypol resin, the hydrophilic properties decrease and the hydrophobic properties increase. Compared to coke obtained from gossypol, it was known that the density of adsorbents obtained as a result of its modification with local bentonite increases. At the end of the study, it was concluded that by adding bentonite as a binder to gossypol resin, its strength increases several times.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.