Issue |
E3S Web Conf.
Volume 487, 2024
2023 7th International Conference on Renewable Energy and Environment (ICREE 2023)
|
|
---|---|---|
Article Number | 01004 | |
Number of page(s) | 8 | |
Section | Solar Energy and Wind Power Generation | |
DOI | https://doi.org/10.1051/e3sconf/202448701004 | |
Published online | 06 February 2024 |
A Hybrid TLBO and Simplex Algorithm to Extract the Optimal Parameters of Photovoltaic Models
1 Khemis Miliana University, Algeria
2 Larbi Tebessi University, Tebessa, Algeria
3 LATSI Laboratory, University of Blida, Algeria
* Corresponding author: n.tidjani@univ-dbkm.dz
This work aims to improve photovoltaic (PV) system performance by extracting parameters for solar models, on extracting parameters for solar models to enhance the performance of photovoltaic (PV) systems. This paper proposes a hybrid method for figuring out the unknown electrical characteristics of single and dual diode models, integrating Teaching Learning Based Optimization (TLBO) with a simplex algorithm. The primary objective is to achieve optimal parameter extraction for the PV system. To overcome the challenge of local optima, a deterministic algorithm is employed in the hybrid method, leveraging the simplex algorithm’s faster convergence towards optimal parameters. Comparative analysis with other algorithms like Particle Swarm Optimization (PSO) and Genetic Algorithm (GA), known for handling similar problems, reveals the superior and robust performance of the proposed hybrid approach. The results obtained from the developed method are validated against data from a commercial silicon R.T.C. France solar cell and simulation outcomes under various conditions, further confirming the results’ effectiveness and reliability.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.