Issue |
E3S Web Conf.
Volume 491, 2024
International Conference on Environmental Development Using Computer Science (ICECS’24)
|
|
---|---|---|
Article Number | 01021 | |
Number of page(s) | 6 | |
Section | Energy Management for Sustainable Environment | |
DOI | https://doi.org/10.1051/e3sconf/202449101021 | |
Published online | 21 February 2024 |
Study of modified thermoplastic elastomers based on polyethylene chlorinated with thiokol rubbers
1 Tashkent Scientific Research Institute of Chemical Technology, Tashkent, Uzbekistan
2 Tashkent Scientific Research Institute of Chemical Technology, Tashkent, Uzbekistan
3 Andijan Machine Building Institute
4 Tashkent State Transport University, Tashkent, Uzbekistan.
5 Tashkent State University named after Islam Karimov
In this paper has been examined the mechanical properties of thermoelastoplastic polymer materials derived from polyethylene chlorinated with secondary polyethylene. In order to ensure the good performance of the thermoelastoplasts obtained in the external environment, attempts were made to increase their resistance to external influences by modifying them with 1% mass of polysulfide rubbers, and resistance to deformation was determined when studying the properties of the polymer material under UV light for 10 hours.
Key words: Materials / thermoelastoplast / modifier / composition / polymers
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.