Investigation of Strain and deformation analysis of Biomaterial in Dental Implant: A 3D FEA Study

¹ Research Scholar,Department of Mechanical Engineering, Hindustan Institute of Technology and Science, Chennai, India
² Professor, Department of Mechanical Engineering, Hindustan Institute of Technology and Science, Chennai, India

^* Corresponding author: jackson.irudhayam@gmail.com

Abstract

In this study, the deformation and strain values in the periimplant bone were assessed in order to examine the impacts of three different dental implant thread pitch settings. In this work, the diameter, length, material, and elastic modulus impacts on the biomechanical behaviour of a new dental implant were predicted using the finite element method. Both a three-dimensional dental implant model and a mandibular segment model that matched the premolar region were acquired. loads that are axially applied. The dental implant models were built using Solidworks 2021, and the simulations were carried out using Ansys / CAE.

In this work, FEA was used to analyse how the bioactive material (30% CFR PEEK) and implant thread design influenced strain and distortion in the implantation. According to the study's hypotheses, the 30% CFR PEEK implant system will be made of an isotropic, homogeneous, and linearly elastic material. Using the modelling software tools Solidworks and Ansys Workbench, strain and deformation at the implant and implant-cortical bone contact are examined and evaluated. In the present investigation, FEA was used to analyse how the bioactive material (30% CFR PEEK) and thread design affected strain and distortion in the implantation system. The 30% CFR PEEK implant system will reportedly be built of an isotropic, homogenous, and linearly elastic substance, according to the study's hypothesis. We study and assess strain and distortion at the implant, cortical and cancellous bone using the modelling software tools Solidworks and Ansys Workbench.