| Issue |
E3S Web Conf.
Volume 497, 2024
5th International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2024)
|
|
|---|---|---|
| Article Number | 03024 | |
| Number of page(s) | 6 | |
| Section | Agricultural Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202449703024 | |
| Published online | 07 March 2024 | |
Investigating the rationale of dimensional elements in the ripper of a combined unit
Andijan branch of Research Institute of Forestry, Andijan, Uzbekistan
Andijan Institute of Agriculture and Agrotechnologies, Andijan, Uzbekistan
* Corresponding author: anvarjon@gmail.com
The article describes a technology for minimizing tillage when growing cotton in rows and calculates the dimensions of the ripper parameters of the combined unit that uses this technology. Based on the results of the experiment, these calculations showed that the ripper's working surface length should not be less than 150 mm and its coverage width should not exceed 140 mm in order to ensure soil softening and prevent ditch compaction beneath the processed layer-by-layer soil structure.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.