| Issue |
E3S Web Conf.
Volume 500, 2024
The 1st International Conference on Environment, Green Technology, and Digital Society (INTERCONNECTS 2023)
|
|
|---|---|---|
| Article Number | 03013 | |
| Number of page(s) | 6 | |
| Section | Engineering and Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202450003013 | |
| Published online | 11 March 2024 | |
Terrafloc Polymer Application to Increase Oil Recovery: Study Literature
1 Department of Petroleum Engineering, Universitas Trisakti, Jakarta, Indonesia
2 Department of Petroleum Engineering, Universitas UPN Veteran, Yogyakarta, Indonesia
* Corresponding author: rinisetiati@trisakti.ac.id
To determine the performance of terrafloc polymer, we must first know the characteristics of the polymer because all of these will affect the increase in oil recovery. Many factors affect the performance of the polymer. Here, using a micromodel to see the movement of oil in 2D, the sweep efficiency of the polymer injection can be seen clearly. The micromodel flooding method was carried out in a series of studies, starting with micromodel preparation, followed by waterflooding and polymer injection at a certain injection flow rate. The data was then analyzed using digital image analysis (DIA) to determine how much oil recovery increased after the injection of terrafloc polymer.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.