| Issue |
E3S Web Conf.
Volume 500, 2024
The 1st International Conference on Environment, Green Technology, and Digital Society (INTERCONNECTS 2023)
|
|
|---|---|---|
| Article Number | 03042 | |
| Number of page(s) | 9 | |
| Section | Engineering and Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202450003042 | |
| Published online | 11 March 2024 | |
A Green Infrastructure SDGS Num 11: Approach Planning Design Model Reliability of Permeability and Concrete Quality Rural Roads P3MD Program in Wonogiri
1 Department of Engineering, Postgraduate Engineering Doctoral Program, Yogyakarta State University, Yogyakarta, Indonesia
2 Department of Engineering, Civil Engineering Program, Veteran Bangun Nusantara University, Sukoharjo, Indonesia
* Corresponding author: iwan.ristanto@yahoo.com
Design planning permeability and quality of rural concrete road construction work in the Program Pembangunan dan Pemberdayaan Masyarakat Desa (P3MD) of the Ministry of Villages, Development of Disadvantaged Regions and Transmigration in Wonogiri, which is environmentally friendly in accordance with the sustainable development goals of SDGs Number.11 Villages "Sustainable Cities and Community", is the urgency of global action to reduce the impact of climate change and overcome challenges in developing a village road infrastructure model that is sustainable and leads to Green Infrastructure. Testing the permeability of village road construction materials using a rational classification method based on the Unified Soil Classification System, ASTM and International Nomenclature Darcy’s Law by calculating the input discharge of rainwater seeping into the soil through the pores of road construction using a rational method, testing the compressive strength of concrete roads using Rebound Hammer / Concrete Hammer Test method, SNI Standard 03-4430-1997. The results of the input volume of rainwater seeping into the ground through the pores (run off) of rural roads construction in Wonogiri one year is 724,866 m3. The average compressive strength of concrete roads from the hammer test results for concrete road test is 290 kg/cm2> K-225 kg/cm2, than the desired construction, namely; standard deviation; (S=1.75), coefficient of variation (Kv= 7.35%), indicating that the data taken has a sufficient level of accuracy, while the uniform data is quite representative of the road section studied.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.