Issue |
E3S Web Conf.
Volume 504, 2024
Journées Scientifiques AGAP Qualité 2024
|
|
---|---|---|
Article Number | 04002 | |
Number of page(s) | 12 | |
Section | Géotechnique | |
DOI | https://doi.org/10.1051/e3sconf/202450404002 | |
Published online | 26 March 2024 |
Imagerie d’interface barrage-fondation par inversion de forme d'onde complète
Imaging of Dam-Foundation contact by Full Waveform Inversion with a shape optimization approach
1 UMA, INRIA, ENSTA Paris, Institut Polytechnique de Paris, 91120 Palaiseau, France
2 EDF R&D, département PRISME, bâtiment U, 6 quai Watier, BP 49, 78401 Chatou Cedex
* Corresponding author: mohamed.boukraa@inria.fr
Dans le cadre de l’étude de la stabilité des barrages, la connaissance de l’interface entre le barrage et la roche revêt une grande importance. Le recours à des techniques géophysiques peut apporter des informations complémentaires par rapport aux mesures géotechniques. Nous proposons ici une méthode de traitement des mesures sismiques, l’objectif étant d'obtenir une image de l'interface entre le béton du barrage et le rocher de la fondation avec une résolution métrique. Il s’agit d’une technique de type « Full Waveform Inversion » avec optimisation de forme. Des résultats numériques utilisant des mesures synthétiques montrent la capacité de la méthode à retrouver l'interface avec une précision satisfaisante, pour un nombre limité de points de mesure et en présence de bruit.
Abstract
In the context of studying the stability of dams, imaging the interface between the dam and the rock is of great importance. Geophysical techniques can provide additional information to geotechnical measurements. Here, a method for processing seismic measurements is presented. The objective is to obtain an image of the interface between the concrete of the dam and the rock of the foundation with metric resolution. The proposed technique is based on "Full Waveform Inversion" with a shape optimization approach. Numerical results using synthetic measurements demonstrate the method's ability to accurately recover the interface with a limited number of measurement points and in the presence of noise.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.