Issue |
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 11 | |
Section | Materials Science | |
DOI | https://doi.org/10.1051/e3sconf/202450501001 | |
Published online | 25 March 2024 |
Enhanced stability of a three-dimensional graphene nanosheets networks modified asphalt mixture
1 Department of Mechanical and Mechatronic Engineering, Cape Peninsula University of Technology, PO Box 1906, Bellville 7535, South Africa
2 Nanoenergy for Sustainable Development in Africa (NESDAF), P.O. Box. 362, Western Cape, 7139, South Africa
* Corresponding author: nqabisas@cput.ac.za
To date, several concepts have been developed to enhance the mechanical and service life of asphalt pavements. Additives such as graphene, carbon nanotubes, carbon fibers and carbon black are used in the hot mix asphalt (HMA) or the asphalt binder (i.e., bitumen) for higher resistance to permanent deformations such as rutting, and transverse thermal cracking due to increased traffic volumes, vehicle mass and axle loads. In this study, graphene nanosheets (GNs) were used as potential modifier of bitumen binder in the HMA. The objective of this work is to investigate the impact of GNs modified bitumen on the Marshall stability and flow of the asphalt mixture using laboratory-compacted samples. The X-ray diffraction (XRD) study revealed a diffraction peak of GNs (002) at 2θ =26.5° along the bitumen’s γ-band and 10-band, which confirm a successful dispersion of GNs into bitumen binder. Furthermore, morphological analysis showed formation of a three dimensional (3d) interconnected networks of GNs between the bitumen micro-structures which could act as bridges for increased flexural strength of the binder. The Marshall stability and flow test results indicate that the mechanical properties of asphalt mixture were influenced by the addition of GNs to the bitumen binder. At 5% by weight of GNs modified bitumen (GNs-B), the compacted hot-mix Asphalt sample showed a higher Marshall stability of 11.7 kN recording 13.6% enhancement in comparison with the asphalt mixture with pure bitumen (P-B). In addition, when GNs-B was used, a lower flow of 1.4 mm was recorded which is desirable to prevent rutting and other forms of failure in asphalt pavements. This study underlines that adding GNs into asphalt binders such as bitumen could play a key role in enhancing the performance of asphalt pavements, which in turn extends their service life and saves maintenance expenses.
Key words: Graphene nanosheets / asphalt mix design / nanotechnology / bitumen
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.