Issue |
E3S Web of Conf.
Volume 508, 2024
International Conference on Green Energy: Intelligent Transport Systems - Clean Energy Transitions (GreenEnergy 2023)
|
|
---|---|---|
Article Number | 02003 | |
Number of page(s) | 9 | |
Section | Renewable Energy Conversion and Storage | |
DOI | https://doi.org/10.1051/e3sconf/202450802003 | |
Published online | 05 April 2024 |
Investigation of solar air collectors with concave air duct
Fergana Polytechnic Institute, 86, Fergana, Fergana, 150107, Uzbekistan
* Corresponding author: bekzodbek45484@mail.ru
In this article study attempts to study the thermal performance of solar air collectors with submersible air ducts and pipes. This study is conducting numerical analysis of the solar collector with pin wings and turbulators to study the effects on the Nusselt number. The paper begins with a numerical analysis of conventional air collectors and compares them with theoretical results. Reynolds numbers range from 2000 to 2500. Next, after the solar collector's performance is evaluated with the bath air with channels, the effects of turbulators of different heights on the Nusselt number are analyzed, followed by the combined effects of pin wings and turbulators. The results are comparable to conventional solar collectors, and suggest that the combined effects of pin wings and turbulators can significantly improve the thermal performance of solar air collectors. The results of this study may contribute to the development of renewable energy-based air conditioning, ventilation and heating systems.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.