Issue |
E3S Web Conf.
Volume 514, 2024
2024 10th International Conference on Environment and Renewable Energy (ICERE 2024)
|
|
---|---|---|
Article Number | 04001 | |
Number of page(s) | 9 | |
Section | Green Building Materials and Indoor Air Quality | |
DOI | https://doi.org/10.1051/e3sconf/202451404001 | |
Published online | 11 April 2024 |
Thermal Insulation Panels with Bio-Based Adhesives
1 Reshetnev Siberian State University of Science and Technology, Krasnoyarsk Rabochy Av., Krasnoyarsk 660 037, Russian Federation
2 University of Sopron, 4. Bajcsy Zs., Sopron 9400, Hungary
* E-mail address: pasztory.zoltan@uni-sopron.hu
Environment friendly insulation panels were manufactured and tested made of pine wood fibers and glued with a bio-based adhesive, called dextran. The aim of this work was to determine relevant technical properties of panels fabricated with this new glue type. In the panels, the ratio of dry glue content was varied from 30% to 60% with 10% steps which runs served as comparison basis. The density of the insulation panels was set to 70 kg/m3, 100 kg/m3 and 125 kg/m3. Beside their thermal conductivity, the compression strength, the bonding strength, and the wetting angle of the adhesive were measured. With the variation of panel densities, the thermal conductivity is in a narrow range of 0.039 to 0.042 W/mK. The resistance to compression at 10% strain was measured to be 0.3 MPa, 0.35 MPa and 0.4 MPa in the panels with 70 kg/m3, 100 kg/m3 and 125 kg/m3, respectively. The wetting angle of the adhesives seemed to correlate only weakly with the bonding strength, and the glue`s wetting ability diminished with the increase of the glue content. The results seem to be competitive if compared with the traditionally used glass and rockwool, and foam insulation materials.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.