Issue |
E3S Web of Conf.
Volume 524, 2024
VII International Conference on Actual Problems of the Energy Complex and Environmental Protection (APEC-VII-2024)
|
|
---|---|---|
Article Number | 03013 | |
Number of page(s) | 5 | |
Section | General Earth Sciences and Energy Resources | |
DOI | https://doi.org/10.1051/e3sconf/202452403013 | |
Published online | 16 May 2024 |
Plasma-chemical pyrolysis of a mixture of fuel oil and methyl tert-butyl ether
Nizhny Novgorod State Technical University named after R.E. Alekseev ; 24, Minin Street, NizhnyNovgorod, 603155, Russia
* Corresponding author: e.titov@nntu.ru
NTP-pyrolysis of heavy petroleum products is a difficult task due to high viscosity, low hydrogen-to-carbon ratio and tendency to polycondensation with formation of high-molecular products. The use of oxygen-containing compounds for NTP-pyrolysis can reduce the yield of polycondensation products due to internal oxygen. In the present work, NTP pyrolysis of fuel oil in the presence of oxygen-containing additive (methyl tert-butyl ether) was carried out at a current source voltage of 700V. The influence of the content of the doping component in the range of 5-15 wt% on conversion, energy consumption and product composition was investigated. At increase in the content of methyl-tert-butyl ether up to 15 wt% in fuel oil the energy consumption decreases and the yield of gaseous products increases from 21.7 to 47.9 wt%. Carrying out NTP-pyrolysis process in the presence of oxygen-containing additive leads to an increase in the depth of processing of heavy fractions.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.