Issue |
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
|
|
---|---|---|
Article Number | 01006 | |
Number of page(s) | 12 | |
Section | Materials | |
DOI | https://doi.org/10.1051/e3sconf/202452901006 | |
Published online | 29 May 2024 |
Effect of Leachate containments on Clay liners
1 Civil Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India
2 Civil Engineering, Knowledge Institute of Technology, Salem, India
3 Civil Engineering, Velammal College of Engineering and Technology, Madurai, India
4 Civil Engineering, Girijananda Chowdhury University, Guwahati, India
5 The Islamic university, Najaf, Iraq.
* Corresponding author: swetha2039reddy@gmail.com
Clayey soil is made up of extremely tiny clay particles that can be employed as a binding material and have a higher retention of water compared to other soils. A hydraulic barrier to fluid flow can be obtained by a clay liner. Clay liners serve a purpose in liner systems to regulate leachate release from the waste or in covering systems to reduce water infiltration. Long-term low hydraulic conductivity constitutes a demand for clay liners to accomplish these objectives. Clay liners were barriers designed to cover landfills and dispose of low and intermediate-level waste. clay sample of its index and engineering characteristics permeability will be examined in a laboratory. After adding Na, Cl (salts) and Mg,Cr,Zn,Pb (metals) at different percentages to the clay soil the Hydraulic conductivity and index characteristics are examined within lab conditions. The measured values of the sample’s including before and after the addition of chemicals at different percentages 0,2,4,6, and 8%, have been compared by the results of the present investigation.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.