| Issue |
E3S Web of Conf.
Volume 531, 2024
Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2024)
|
|
|---|---|---|
| Article Number | 01029 | |
| Number of page(s) | 5 | |
| Section | Industrial Decarbonization and Green Chemistry | |
| DOI | https://doi.org/10.1051/e3sconf/202453101029 | |
| Published online | 03 June 2024 | |
Two-parameter models of brittle materials behavior under uniaxial compression
Petrozavodsk State University. Lenin Str., 33, Petrozavodsk, 185910, Russia
* Corresponding author: kolesnikovgn@ya.ru
Numerical and analytical models are widely presented in the literature. In this report, analytical models of only one class are considered, the first of which is the Furamura model. Models of this class do not require a large amount of input data; in addition, their mathematical description does not contain complex equations. The researchers initially used these models to analyze the behavior of concrete at high temperatures. The current scope of these models covers applied analysis of the behavior of rocks, frozen soils, and other materials, including their behavior on the downward branch under controlled deformation. The purpose of this report is to discuss not only the positive characteristics of the models of the class under consideration, but also to draw the readers' attention to the limitations in the use of the models, which will contribute to their improvement and effective application for sustainable development.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.