Issue |
E3S Web of Conf.
Volume 531, 2024
Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2024)
|
|
---|---|---|
Article Number | 01039 | |
Number of page(s) | 6 | |
Section | Industrial Decarbonization and Green Chemistry | |
DOI | https://doi.org/10.1051/e3sconf/202453101039 | |
Published online | 03 June 2024 |
Tribological studies of materials for sliding bearings when lubricated with hydraulic fluid
Mechanical Engineering Research Institute of the Russian Academy of Sciences, Maly Kharitonyevsky lane, 4, 101000 Moscow, Russia
* Corresponding author: roschin50@yandex.ru
Tribological research of materials BrOPh6.5-0.15, PH4M paired with 40X steel and lubricated with hydraulic fluid AMh-10 showed good antifriction properties. The results of the research on the influence of load, speed and temperature on the coefficient of friction of materials: BrOPh6.5-0.15 and PH4M when lubricated with AMh-10 hydraulic fluid. At a load of 0.5447 MPa, the coefficient of friction of BrOPh6.5-0.15 material at a temperature of 90°C is 1.58 times higher, and at a load of 2.003 MPa, the coefficient of friction of BrOPh6.5-0.15 material is 2.85 times higher than the coefficient of friction of BrOPh6.5-0.15 material at a temperature of 20°C. Materials BrOPh6.5-0.15 and PH4M are promising for application in plain bearings of pumps pumping hydraulic fluid AMh-10.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.