Issue |
E3S Web Conf.
Volume 541, 2024
VI International Scientific Forum on Computer and Energy Sciences (WFCES 2024)
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 15 | |
Section | Renewable Energy Sources and Energy-Saving Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202454101001 | |
Published online | 18 June 2024 |
Numerical simulation of wind turbines conducted using COMSOL software
1 Institute of Mechanics and Seismic Stability of Structures named after M. T. Urazbaev of the AS RUz, Tashkent, Uzbekistan
2 Tashkent State University of Economics, Tashkent, Uzbekistan
3 Oriental University, Tashkent, Uzbekistan
* Corresponding author: mmhamdamov@mail.ru
The article presents the results of modeling air flow in a turbulent mode of flow around a wind device as profiles and fields of pressure and velocity. The simulation was performed with the help of the COMSOL software package. The axial velocity profile, pressure coefficient around the blade and instantaneous power coefficient of one blade using the transient SST model are in good agreement with the experimental data. The presented values of the device’s power factor Cp were obtained using different turbulence models. When mathematically modeling the flow around a vertical axis wind turbine, the transient SST turbulence model can be used, which provides satisfactory results.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.