| Issue |
E3S Web Conf.
Volume 548, 2024
X International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-X 2024)
|
|
|---|---|---|
| Article Number | 08003 | |
| Number of page(s) | 7 | |
| Section | Environmental Engineering, Mining and Soil Treatment Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202454808003 | |
| Published online | 12 July 2024 | |
Study of the possibility of reducing diesel exhaust gas smoke engine bio additives into fuel
1 Navoi State University of Mining and Technologies, Navoi, 210100, Uzbekistan
2 Bauman Moscow State Technical University, Moscow, 105005, Russia
* Corresponding author: a_nor7@mail.ru
One of the modern ways to reduce the technogenic impact of the transport sector on the environment is the expansion of the use of biofuels. The article discusses computational studies of the flow of these fuels in a sprayer using the Ansys Fluent software package. The stationary flow of the specified fuels into the sprayer of a diesel nozzle of the FDM-22 type Plant was simulated which was manufactured by the Noginsk Fuel Equipment Plant with a sprayer of the Altai Precision Products Plant was simulated. The sprayer had five spraying holes with a diameter of 0.35 mm. At the same time, the pressure at the entrance to the design area was 51.5 MPa, and the back pressures were 0.1 and 8.9 MPa. While comparing the flow of rapeseed oil, to the flow of the emulsion of rapeseed oil and ethanol has a higher injection rate. However, compared with the flow of petroleum diesel fuel, it has a lower injection rate.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.