Issue |
E3S Web of Conf.
Volume 550, 2024
The 16th International Scientific Conference of Civil and Environmental Engineering for the PhD. Students and Young Scientists – Young Scientist 2024 (YS24)
|
|
---|---|---|
Article Number | 01010 | |
Number of page(s) | 13 | |
Section | Civil Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202455001010 | |
Published online | 16 July 2024 |
Natural gums as green corrosion inhibitors for mild steel
Department of environmental engineering and sustainable development entrepreneurship, Technical University of Cluj-Napoca, 400641, Cluj-Napoca, Romania ;
In this study the corrosion inhibition efficiency of Guar gum and Arabic gum are investigated on mild steel in concentrated chlorohydric acid. Weight loss and electrochemical methods, potentiondynamic polarization and electrochemical impedance spectroscopy were used to determine the optimum concentration of each gum. The results show that there is a direct correlation between concentration of inhibitor and corrosion inhibition efficiency, therefore the best efficiency was obtained at the highest concentration, 3.3 g/l. When comparing the two polysaccharides Guar gums has a better inhibition effect than Arabic gum at the same concentration. The inhibition mechanism was analysed by fitting the electrochemical results to an adsorption isotherm. This research offers a green alternative to the synthetic inhibitors used in today’s industry during acid pickling in the manufacturing process of mild steel. Both substances are naturally obtained and considered green corrosion inhibitors due to their negligible impact on the environment. Future research on the topic will include more natural compounds tests in the same experimental conditions and comparing them to market inhibitors in terms of efficiency.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.