Issue |
E3S Web of Conf.
Volume 550, 2024
The 16th International Scientific Conference of Civil and Environmental Engineering for the PhD. Students and Young Scientists – Young Scientist 2024 (YS24)
|
|
---|---|---|
Article Number | 01036 | |
Number of page(s) | 15 | |
Section | Civil Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202455001036 | |
Published online | 16 July 2024 |
Hydrothermal performance of wooden beam on solid masonry with capillary-active internal insulation
Vysoké učení technické v Brně, Fakulta stavební, Ústav pozemního stavitelství, Veveří 331, 60200 Brno
* Corresponding author: Lukas.Sukop@vutbr.cz
With the increasing requirements for the energy performance of buildings, there is a demand for internal insulation systems in buildings where it is not possible to apply an external insulation system for legislative reasons. Currently, there has been an upsurge in the development of diffusion-open insulation materials whose properties can compensate for the risks of damage to solid masonry walls insulated with traditional diffusion-closed internal insulation systems. The properties of diffusion-open systems are already well known. This paper focuses on the simulation of the thermal moisture behaviour of a detail of a timber beam embedment in a wall with capillary active thermal insulation in cold climatic conditions of Central Europe.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.