Issue |
E3S Web of Conf.
Volume 559, 2024
2024 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2024)
|
|
---|---|---|
Article Number | 04041 | |
Number of page(s) | 9 | |
Section | Structural Engineering & Concrete Technology | |
DOI | https://doi.org/10.1051/e3sconf/202455904041 | |
Published online | 08 August 2024 |
Kriging interpolation to determine intermediate mechanical properties of soils
1 Solid Research Group, LLP, 010000 Astana, Kazakhstan
2 D. Serikbayev East Kazakhstan technical university, Schools of Architecture and Construction, 070004, Ust-Kamenogorsk, Kazakhstan
3 L.N. Gumilyov Eurasian National University, Department of Civil Engineering, 010008 Astana, Kazakhstan
4 Toraighyrov University, Department of Vocational Education and Environmental Protection, 140008 Pavlodar, Kazakhstan
* Corresponding author: sabit.altynbekovich.worldgis@gmail.com
This study examines the application of interpolation technique using ArcGIS software to determine the average mechanical properties of soils in a specific area. The study of soil geotechnical properties plays an important role in construction design and reliability. However, constraints such as limited resources and difficulty in accessing test sites can make it difficult to conduct laboratory and field work on each soil sample. Therefore, the use of interpolation techniques can fill data gaps and provide a more comprehensive understanding of the soil layer characteristics. The proposed Kriging interpolation methodology allows setting the required depth and obtaining accurate values of geotechnical soil characteristics, which facilitates the assessment of engineering and geological conditions at the construction site. This can reduce the cost of survey work and provide data not only for idealized conditions, but also for realistic ground layering scenarios. The proposed methodology also serves as a practical tool for foundation base visualization, providing engineers with a complete understanding of the mechanical characteristics of the soil and helping to select optimal foundation types and sizes.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.