Issue |
E3S Web Conf.
Volume 563, 2024
International Conference on Environmental Science, Technology and Engineering (ICESTE 2024)
|
|
---|---|---|
Article Number | 02038 | |
Number of page(s) | 8 | |
Section | Civil Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202456302038 | |
Published online | 30 August 2024 |
Obtaining ammonium sulfate and calcium carbonate by processing natural gypsum and phosphogypsum
1 Namangan Institute of Engineering - Technological, 160115 Kosonsoy Str, 7 Namangan, Uzbekistan
2 Navoi State University of Mining and Technologies, 210100 Galaba Str. 27, Navoiy, Uzbekistan
3 Institute of General and Inorganic Chemistry, 100170 Mirzo Ulugbek Str. 77a, Tashkent, Uzbekistan
* Corresponding author: temirov-2012@mail.ru
Studying the conversion of local natural gypsum and phosphogypsum, categorized as a byproduct of extracting phosphoric acid (EPA), into ammonium carbonate through a liquid-based method. At the same time, the concentration of ammonium carbonate in an aqueous solution was obtained in the range from 10 to 50%. The norms of ammonium carbonate were 100, 105, 110% relative to stoichiometry. The transfer time of ammonium carbonate to the reaction zone was from 5 to 30 minutes, and the conversion time was also studied in the range from 5 to 30 minutes. The conversion process was carried out at a temperature of 30 to 50°C. The optimal time for the carbonate conversion of gypsum was 30 minutes, and the conversion rate was 95.68 and 96.83%.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.