Issue |
E3S Web Conf.
Volume 563, 2024
International Conference on Environmental Science, Technology and Engineering (ICESTE 2024)
|
|
---|---|---|
Article Number | 03081 | |
Number of page(s) | 6 | |
Section | Green Environment | |
DOI | https://doi.org/10.1051/e3sconf/202456303081 | |
Published online | 30 August 2024 |
Estimating reference evapotranspiration using the Hargreaves - Samani formula for end-user applications
National Research University, Tashkent Institute of Irrigation and Mechanization of Agriculture, Kary-Niyaziy-39, 100000 Tashkent, Uzbekistan
* Corresponding author: Sharipjonova_1994@mail.ru
Reference evapotranspiration is one of the main geophysical parameters, the reliable assessment of which is important in irrigation water management, planning, distribution and regulation of water resources. The Food and Agriculture Organization of the United Nations recommends using the Penman-Monteith formula to estimate ETo. However, its’ application by end-users is limited since the formula requires several parameters which are often missing. In such cases, it recommends the Hagreaves-Samani formula. In this study, the reference evapotranspiration is estimated as the case study for Uzbekistan applying both, the Penman - Monteith and the Hargreaves - Samani methods. Data used is taken from 13 state climate stations of Uzbekistan. The results of the study indicate that under data-scarce conditions, the Hargreaves – Samani formula, can be recommended for end-user applications, after the adjustment to local conditions, in order to determine the water requirements of crops and irrigation scheduling.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.