Issue |
E3S Web Conf.
Volume 613, 2025
XI International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-XI 2025)
|
|
---|---|---|
Article Number | 01010 | |
Number of page(s) | 8 | |
Section | Environmental Engineering and Natural Resource Management | |
DOI | https://doi.org/10.1051/e3sconf/202561301010 | |
Published online | 07 February 2025 |
Production of food-grade calcium phosphate utilizing thermal phosphoric acid and lime
1 General and Inorganic Chemistry Institute of the Academy Sciences of the Republic of Uzbekistan, 77A, M.Ulugbek str., Tashkent, 100170, Uzbekistan
2 Tashkent state technical university named after Islam Karimov, 2, University str., Tashkent, 100170, Uzbekistan
3 Namangan Institute of Engineering - Technological, 7, Kosonsoy str., Namangan, 160115, Uzbekistan
* Corresponding author: turdialiyeva81@mail.ru
The importance of feed phosphates in animal husbandry and the state of their production are mentioned in the article. Dicalcium phosphate and tricalcium phosphate production processes in the recirculation mode and tricalcium phosphate in the non-recirculation mode were studied by the interaction of thermal phosphoric acid and lime. In this case, at a concentration of 50.58% of Н3РO4 in Р2O5, its optimal rate was obtained from stoichiometry for dicalcium phosphate as 95%, for tricalcium phosphate as 100%. It fully meets the standard requirements for the quality of two types of nutritional calcium phosphates, at the same time it allows to increase the actual mass of poultry and cattle, plays an important role in dramatically increasing the weight of black cattle, accelerating their digestion process, milk production, and increasing the volume of egg laying in poultry, and also treats diseases such as rickets, osteomalacia, anemia.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.