Issue |
E3S Web Conf.
Volume 614, 2025
International Conference on Agritech and Water Management (ICAW 2024)
|
|
---|---|---|
Article Number | 04013 | |
Number of page(s) | 7 | |
Section | Ecology and Environmental Sciences | |
DOI | https://doi.org/10.1051/e3sconf/202561404013 | |
Published online | 07 February 2025 |
Sustainable road surfaces: Evaluating eco-friendly additives on bitumen penetration grade
KazdorNII JSC, 010000 Astana, Kazakhstan
* Corresponding author: smagulovamariya98@gmail.com
Bitumen serves as the primary binding material in asphalt concrete mixtures for road construction in Kazakhstan, where the diverse climate demands specific properties for durability and reliability. This study investigates the potential of using bitumen grade 50/70 in the southern regions of the country, known for extreme summer temperatures. While bitumen grades 70/100 and 100/130 are traditionally used, especially in the southern and northern regions respectively, there is growing interest in alternatives like grade 50/70 due to supply challenges and increased demand. However, concerns about its structural integrity under high thermal stress necessitate further analysis. The research compares the performance of 50/70 and 70/100 bitumen grades through laboratory tests focusing on penetration, softening point, viscosity, and adhesion. The goal is to assess the feasibility of 50/70 bitumen for road construction under the unique climatic conditions of southern Kazakhstan and to explore modifications for enhanced performance. The findings will contribute to optimizing bitumen
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.