| Issue |
E3S Web Conf.
Volume 680, 2025
The 4th International Conference on Energy and Green Computing (ICEGC’2025)
|
|
|---|---|---|
| Article Number | 00039 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/202568000039 | |
| Published online | 19 December 2025 | |
Impact of Plastic Material on Mitigating a Waterhammer in a Pressurized pipe
Laboratory M2S2I, ENSET Mohammedia, Université Hassan II Casablanca-Morroco
* Corresponding author: tarek.bahrar1@gmail.com
Water hammer, or hydraulic shock, is an overpressure caused by a sudden change in flow boundary conditions. To control this phenomena and improve the reliability and longevity of pipeline conveying transient flow , a replacing part of the main pipe with a plastic pipe segment can be an effective solution. This work is carried out in the case of a one-dimensional transient flow. The set of partial differential equations to be solved is of the hyperbolic type and is ideally suited to the method of characteristics. The effect of the plastic pipe element on the overpressure generated by the water hammer is examined
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.