| Issue |
E3S Web Conf.
Volume 692, 2026
3rd International Conference on Intelligent and Sustainable Power and Energy Systems (ISPES 2025)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 6 | |
| Section | Electronic and Electrical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202669202002 | |
| Published online | 04 February 2026 | |
Design and Fabrication of Walking E-Bike for Pedestrians
1 EEE Department, GNITC, Hyderabad, India
2 EEE Department, GNITC, Hyderabad, India
3 EEE Department, Sree Dattha Institute of Engineering and Science, Hyderabad, India
4 EEE Department, GNITC, Hyderabad, India
* Corresponding author: This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract
In the normal electric bike system, every time we need to replace the battery, in the same way treadmill waking system is required continues electric power supply. These two methods having their own advantages and disadvantages. These two methods advantages are combined and developed a new innovative Walking E-Bike project. The waking E-Bike can work has E-bike and also treadmill, when the vehicle is moving plain or downhill side the waking E-Bike works as treadmill and increase the physical activity also it works as in regenerative mode it will charge the battery. If the vehicle is moving uphill side, it works as normal E-Bike and the stored energy is utilized to run the vehicle. In this project PWM Control, Variable Frequency Drives (VFD) are used effective synchronization and speed control of motor. Smart Battery Management system is used for enhance battery life and smooth ride of Vehicle.
© The Authors, published by EDP Sciences, 2026
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.