Open Access
Issue
E3S Web Conf.
Volume 34, 2018
International Conference on Civil & Environmental Engineering (CENVIRON 2017)
Article Number 01037
Number of page(s) 5
Section Civil
DOI https://doi.org/10.1051/e3sconf/20183401037
Published online 19 March 2018
  1. N. S. Mashaan, A. H. Ali, M. R. Karim, and M. Abdelaziz, Int. J. Phys. Sci. 6, 684–690, (2011) [Google Scholar]
  2. K. Soudani, V. Cerezo, and S. Haddadi, Constr. Build. Mater. 104, 126–133, (2016) [CrossRef] [Google Scholar]
  3. F. Xiao, S. Amirkhanian, H. Wang, and P. Hao, Constr. Build. Mater. 64, 316–323, (2014) [CrossRef] [Google Scholar]
  4. Z. N. Kalantar, M. R. Karim, and A. Mahrez, Constr. Build. Mater. 33, 55–62, (2012) [CrossRef] [Google Scholar]
  5. Y. Yildirim. Polymer modified asphalt binders, Constr. Build. Mater. 21, 66–72, (2007) [CrossRef] [Google Scholar]
  6. F. Moreno, M. Sol, J. Martín, M. Pérez, and M. C. Rubio, Mater. Des. 47, 274–280, (2013) [CrossRef] [Google Scholar]
  7. T. U. Ganiron, Int. J. Serv. Sci. Technol. 7, 181–194, (2014) [Google Scholar]
  8. T. Clark, T. Int. Lat. Conf., 1-21, (2013) [Google Scholar]
  9. M. H. Harun and R. Razali, J. Jab. Kerja Raya 1, 58–70, (2013) [Google Scholar]
  10. D. Dong, X. Huang, X. Li, and L. Zhang, Constr. Build. Mater. 29, 316–322, (2012) [CrossRef] [Google Scholar]
  11. N. Vichitcholchai and N. Panmai, Jaratsri, Na-Ranong, Rubber Thai J. 39, 32–39, (2012) [Google Scholar]
  12. N. Tuntiworawit, D. Lavansiri, and C. Phromsorn, Proc. East Asia Soc. Transp. Stud. 5, 679–694, (2005) [Google Scholar]
  13. C. S. Ruggles. The efficient use of environmentally-friendly natural rubber latex in road construction – Past, present and future, www.revertex.com.my, (2004) [Google Scholar]
  14. F. J. Navarro, P. Partal, F. Martínez-Boza, C. Valencia, and C. Gallegos, Chem. Eng. J. 89, 53–61, (2002) [CrossRef] [Google Scholar]
  15. R. A. Al-Mansob, A. Ismail, A. N. Alduri, C. H. Azhari, M. R. Karim, and N. I. M. Yusoff, Constr. Build. Mater. 63, 242–248, (2014) [CrossRef] [Google Scholar]
  16. J. P. Wu, P. R. Herrington, and K. Neaylon, NZ Transport Agency Research Report 578, (2015) [Google Scholar]
  17. A. Ismail, R. . Al-Mansob, N. I. B. . Yusoff, and M. . Karim, Aust. J. Basic Appl. Sci. 6, 97–101, (2012) [Google Scholar]
  18. N. M. Azahar, N. A. Hassan, R. P. Jaya, M. A. A. Kadir, N. Z. M. Yunus, and M. Z. H. Mahmud, Int. J. Agric. For. Plant. 2, 212–218, (2016) [Google Scholar]
  19. M. R. Ibrahim, H. Y. Katman, M. R. Karim, S. Koting, and N. S. Mashaan, Adv. Mater. Sci. Eng. 1–8, (2013) [CrossRef] [Google Scholar]
  20. J. Ahmad, N. I. M. Yusoff, M. R. Hainin, M. Y. A. Rahman, and M. Hossain, Constr. Build. Mater. 50, 567–576, (2014) [CrossRef] [Google Scholar]
  21. M. E. Abdullah. Performance of warm mix asphalt (WMA) mixture using nanoclay modified asphalt binder, PhD thesis, Universiti Tun Hussein Onn Malaysia, (2014) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.