Coal combustion modelling in a frontal pulverized coal-fired boiler

Paweł Madejski

doi:10.1051/e3sconf/20184600010

All issues

Volume 46 (2018)

E3S Web Conf., 46 (2018) 00010

References

Open Access

Issue		E3S Web Conf. Volume 46, 2018 3^rd International Conference on Energy and Environmental Protection


Article Number		00010
Number of page(s)		8
DOI		https://doi.org/10.1051/e3sconf/20184600010
Published online		13 September 2018

Minghou X., Azevedo J.L.T., Carvalho M.G., Modeling of a front wall fired utility boiler for different operating conditions, Comput Method Appl M, 190, pp. 3581-3590, (2001) [CrossRef] [Google Scholar]
Sanghyun P., Jungeun A. K., Changkook R., Taeyoung Ch., Won Y., Young-Ju K., Ho-Young P., Hee-Chun L., Combustion and heat transfer characteristics of oxy-coal combustion in a 100 MWe front-wall-fired furnace, Fuel, 106, pp. 718-729, (2013) [CrossRef] [Google Scholar]
Belosevic S., Sijercic M., Oka S., Tucakovic D., Three-dimensional modeling of utility boiler pulverized coal tangentially fired furnace, Int J Heat Mass Tran, 49, pp. 3371-3380, (2006) [CrossRef] [Google Scholar]
Asotani T., Yamashita T., Tominga H., Uesugi Y., Itaya Y., Mori S., Prediction if ignition behavior in a tangentially fired pulverized coal boiler using CFD, Fuel, 87, pp. 482-490, (2008) [CrossRef] [Google Scholar]
Fan J., Qian L., Ma Y., Sun P., Cen K., Computational modeling of pulverized coal combustion processes in tangentially fired furnaces, Chem Eng J. 81, pp. 261-269, (2001) [CrossRef] [Google Scholar]
Dal Secco S., Juan O., Louis-Louisy M., Lucas Y-V., Plion P., Porcheron L., Using a genetic algorithm and CFD to identify low NOx configurations in an industrial boiler, Fuel, 158, pp. 672-683, (2015) [CrossRef] [Google Scholar]
Modliński N., Numerical simulation of SNCR (selective non-catalytic reduction) process in coal fired grate boiler, Energy, 92, pp. 67-76, (2015) [CrossRef] [Google Scholar]
Madejski P., Taler D., Analysis of temperature and stress distribution of superheater tubes after attemperation or sootblower activation. Energ Convers Manage, 71, pp. 131-137, (2013) [CrossRef] [Google Scholar]
Madejski P., Janda T., Taler J., Nabagło D., Węzik R., Mazur M., Analysis of fouling degree of individual heating surfaces in a pulverized coal fired boiler, J Energ Resour-ASME, 140, pp. 1-8, (2018) [Google Scholar]
Madejski P., Taler D., Taler J., Numerical model of a steam Superheater with a complex shape of the tube cross section using control volume based finite element method, Energ Convers Manage, 118, pp. 179-192, (2016) [CrossRef] [Google Scholar]
Pająk T., Jurczyk M., Initial operating experience with the new Polish waste-to-energy plants, Waste Management, 6 Waste-to-energy, Eds: Karl J. Thomé-Kozmiensky, Stephanie Thiel (Neuruppin, TK Verlag Karl Thomé-Kozmiensky 2016) [Google Scholar]
Turlej T., Banaś M., Management of communal sewage waste in Poland, International Multidisciplinary Scientific GeoConference SGEM, 978, pp. 627-634, (2017) [Google Scholar]
Bhuiyan A.A., Naser J., CFD modelling of co-firing of biomass with coal under oxyfuel combustion in a large scale power plant, Fuel, 159, pp. 150-168, (2015) [CrossRef] [Google Scholar]
Archambeau F., Mechitoua N., Sakiz M., Code_Saturne: A finite volume code for the computation of turbulent incompressible flows-industrial applications, IJFV International Journal On Finite Volumes, 1, pp. 1-64, (2004) [Google Scholar]
Code Saturne 3.3.0 Theory Guide, Fluid Dynamics, Power Generation and Environment Department, Single Phase Thermal-Hydraulics Group, EDF Lab Chatou, France May, (2014) [Google Scholar]
Pope S. B., The probability approach to the modelling of turbulent reacting flows, Combust Flame, 27, pp. 299-312, (1976) [CrossRef] [Google Scholar]
Poinsot T., Veynante D., Theoretical and numerical combustion, second ed., (R.T. Edwards Inc., Philadelphia 2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Minghou X., Azevedo J.L.T., Carvalho M.G., Modeling of a front wall fired utility boiler for different operating conditions, Comput Method Appl M, 190, pp. 3581-3590, (2001) [CrossRef] [Google Scholar]

[2] Sanghyun P., Jungeun A. K., Changkook R., Taeyoung Ch., Won Y., Young-Ju K., Ho-Young P., Hee-Chun L., Combustion and heat transfer characteristics of oxy-coal combustion in a 100 MWe front-wall-fired furnace, Fuel, 106, pp. 718-729, (2013) [CrossRef] [Google Scholar]

[3] Belosevic S., Sijercic M., Oka S., Tucakovic D., Three-dimensional modeling of utility boiler pulverized coal tangentially fired furnace, Int J Heat Mass Tran, 49, pp. 3371-3380, (2006) [CrossRef] [Google Scholar]

[4] Asotani T., Yamashita T., Tominga H., Uesugi Y., Itaya Y., Mori S., Prediction if ignition behavior in a tangentially fired pulverized coal boiler using CFD, Fuel, 87, pp. 482-490, (2008) [CrossRef] [Google Scholar]

[5] Fan J., Qian L., Ma Y., Sun P., Cen K., Computational modeling of pulverized coal combustion processes in tangentially fired furnaces, Chem Eng J. 81, pp. 261-269, (2001) [CrossRef] [Google Scholar]

[6] Dal Secco S., Juan O., Louis-Louisy M., Lucas Y-V., Plion P., Porcheron L., Using a genetic algorithm and CFD to identify low NOx configurations in an industrial boiler, Fuel, 158, pp. 672-683, (2015) [CrossRef] [Google Scholar]

[7] Modliński N., Numerical simulation of SNCR (selective non-catalytic reduction) process in coal fired grate boiler, Energy, 92, pp. 67-76, (2015) [CrossRef] [Google Scholar]

[8] Madejski P., Taler D., Analysis of temperature and stress distribution of superheater tubes after attemperation or sootblower activation. Energ Convers Manage, 71, pp. 131-137, (2013) [CrossRef] [Google Scholar]

[9] Madejski P., Janda T., Taler J., Nabagło D., Węzik R., Mazur M., Analysis of fouling degree of individual heating surfaces in a pulverized coal fired boiler, J Energ Resour-ASME, 140, pp. 1-8, (2018) [Google Scholar]

[10] Madejski P., Taler D., Taler J., Numerical model of a steam Superheater with a complex shape of the tube cross section using control volume based finite element method, Energ Convers Manage, 118, pp. 179-192, (2016) [CrossRef] [Google Scholar]

[11] Pająk T., Jurczyk M., Initial operating experience with the new Polish waste-to-energy plants, Waste Management, 6 Waste-to-energy, Eds: Karl J. Thomé-Kozmiensky, Stephanie Thiel (Neuruppin, TK Verlag Karl Thomé-Kozmiensky 2016) [Google Scholar]

[12] Turlej T., Banaś M., Management of communal sewage waste in Poland, International Multidisciplinary Scientific GeoConference SGEM, 978, pp. 627-634, (2017) [Google Scholar]

[13] Bhuiyan A.A., Naser J., CFD modelling of co-firing of biomass with coal under oxyfuel combustion in a large scale power plant, Fuel, 159, pp. 150-168, (2015) [CrossRef] [Google Scholar]

[14] Archambeau F., Mechitoua N., Sakiz M., Code_Saturne: A finite volume code for the computation of turbulent incompressible flows-industrial applications, IJFV International Journal On Finite Volumes, 1, pp. 1-64, (2004) [Google Scholar]

[15] Code Saturne 3.3.0 Theory Guide, Fluid Dynamics, Power Generation and Environment Department, Single Phase Thermal-Hydraulics Group, EDF Lab Chatou, France May, (2014) [Google Scholar]

[16] Pope S. B., The probability approach to the modelling of turbulent reacting flows, Combust Flame, 27, pp. 299-312, (1976) [CrossRef] [Google Scholar]

[17] Poinsot T., Veynante D., Theoretical and numerical combustion, second ed., (R.T. Edwards Inc., Philadelphia 2005) [Google Scholar]