Open Access
Issue
E3S Web Conf.
Volume 49, 2018
SOLINA 2018 - VII Conference SOLINA Sustainable Development: Architecture - Building Construction - Environmental Engineering and Protection Innovative Energy-Efficient Technologies - Utilization of Renewable Energy Sources
Article Number 00101
Number of page(s) 8
DOI https://doi.org/10.1051/e3sconf/20184900101
Published online 13 August 2018
  1. S.A. Miller, A. Horvath, P.J.M. Monteiro, Readil implementable techniques can cut annual CO2 emissions from the production of concrete by over 20%, Environ. Res. Lett. 11, 74029 (2016) [CrossRef] [Google Scholar]
  2. P.J.M. Monteiro, S.A. Miller, A. Horvath, Towards sustainable concrete, Nat. Mater. 16, 698-699 (2017) [CrossRef] [Google Scholar]
  3. Z. Owsiak, Korozja wewnętrzna betonu, Kielce University of Technology (2015) [Google Scholar]
  4. PCA, Types and Coauses of Conrete Deterioration, Portl. Cem. Assoc., 1-16 (2002) [Google Scholar]
  5. B. Kerkhoff, Effects of Substances on Concrete and Guide to Protective Treatment, Portl. Cem. Assoc., 1-36 (2007) [Google Scholar]
  6. J. Davidovits, Geopolymers, J. Therm. Anal., 37, 1633-1656 (1991) [Google Scholar]
  7. S. Sikora, B. Michalowski, B. Holuj, A. Ignerowicz, M. Hynowski, Porównanie mrozoodporności betonu geopolimerowego i napowietrzonego betonu tradycyjnego, Mater. Bud., 1, 46-49 (2017) [Google Scholar]
  8. PN-EN 450-1:2012 “Fly ash for concrete - Part 1: Definitions, specifications, conformity criteria” [Google Scholar]
  9. PN-EN 15167-1:2007 “Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria” [Google Scholar]
  10. PN-EN 13263-1:2010 “Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria” [Google Scholar]
  11. PN-EN 1015-3:2000 “Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table)” [Google Scholar]
  12. PN-EN 196-1:2016-07 “Methods of testing cement - Part 1: Determination of strength” [Google Scholar]
  13. PN-EN 1542:2000 “Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off” [Google Scholar]
  14. D. Yemam, B.-J. Kim, J.-Y. Moon, C. Yi, Mechanical Properties of Epoxy Resin Mortar with Sand Washing Waste as Filler, Materials (Basel), 10, 246 (2017) [CrossRef] [Google Scholar]
  15. J. Davidovits, Geopolymer Chemistry and Aplication, 4h edition, Institute Geopolymere, 377-388 (2015) [Google Scholar]
  16. M. Borntovsky, O. Sobalik, Z. Tvaruzkova, Z. Dedeck, J. Roubicek, P. Prudkova, Z. Svoboda, Structure and stability of geopolymer synthesized from kaolinitic and shale clay residues, Geopolymer Proc., 81-84 (2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.