EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 60 (2018) E3S Web Conf., 60 (2018) 00027 References
Open Access
Issue
E3S Web Conf.
Volume 60, 2018
Ukrainian School of Mining Engineering
Article Number 00027
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/20186000027
Published online 16 October 2018
  1. Bondarenko, V., Kovalevs’ka, I., & Fomychov, V. (2012). Features of carrying out experiment using finite-element methodat multivariate calculation of mine massif – combined support system. Geomechanical Processes During Underground Mining, 7–13. https://doi.org/10.1201/b13157-3 [Google Scholar]
  2. Bondarenko, V.I., Kharin, Ye.N., Antoshchenko, N.I., & Gasyuk, R.L. (2013). Basic scientific positions of forecast of the dynamics of methane release when mining the gas bearing coal seams. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 24–30. [Google Scholar]
  3. Dychkovskyi, R.O., Lozynskyi, V.H., Saik, P.B., Petlovanyi, M.V., Malanchuk, Ye.Z., & Malanchuk, Z.R. (2018). Modeling of the disjunctive geological fault influence on the exploitation wells stability during underground coal gasification. Archives of Civil and Mechanical Engineering, 18(4), 1183–1197. https://doi.org/10.1016/j.acme.2018.01.012 [CrossRef] [Google Scholar]
  4. Bondarenko, V., Maksymova, E., & Koval, O. (2013). Genetic classification of gas hydrates deposits types by geologic-structural criteria. Annual Scientific-Technical Collection – Mining of Mineral Deposits, 115–119. https://doi.org/10.1201/b16354-21 [CrossRef] [Google Scholar]
  5. Kovalevska, I., Symanovych, H., Barabash, M., & Snihur, V. (2017). Research intro rock pressure manifestations in interstratal rocks during descending and simultaneous mining of C9 and C10top coal seams. Mining of Mineral Deposits, 11(1): 50–56. https://doi.org/10.15407/mining11.01.050 [CrossRef] [Google Scholar]
  6. Khomenko, O., Kononenko, M., Myronova, I., & Sudakov, A. (2018). Increasing ecological safety during underground mining of iron-ore deposits deposits. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 29–38. [CrossRef] [Google Scholar]
  7. Bondarenko, V., Svietkina, O., & Sai, K. (2018). Effect of mechanoactivated chemical additives on the process of gas hydrate formation. Eastern-European Journal of Enterprise Technologies, 1(6(91)), 17–26. https://doi.org/10.15587/1729-4061.2018.123885 [CrossRef] [Google Scholar]
  8. Kovalevs’ka, I., Symanovych, G., & Fomychov, V. (2013). Research of stress-strain state of cracked coal-containing massif near-the-working area using finite elements technique. Annual Scientific-Technical Collection – Mining of Mineral Deposits, 159–163. https://doi.org/10.1201/b16354-28 [Google Scholar]
  9. Lozynskyi, V.H., Dychkovskyi, R.O., Falshtynskyi, V.S., & Saik, P.B. (2015). Revisiting possibility to cross disjunctive geological faults by underground gasifier. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 22–28. [Google Scholar]
  10. Sdvizhkova, Ye.A., Babets, D.V., Smirnov, A.V. (2014). Support loading of assembly chamber in terms of western donbas plough longwall. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 26–32. [Google Scholar]
  11. Falshtyns’kyy, V., Dychkovs’kyy, R., Lozyns’kyy, V., & Saik, P. (2013). Justification of the gasification channel length in underground gas generator. Annual Scientific-Technical Collection – Mining of Mineral Deposits, 125–132. https://doi.org/10.1201/b16354-23 [CrossRef] [Google Scholar]
  12. Kovalevs’ka, I., Illiashov, M., Fomychov, V., & Chervatuk, V. (2012). The formation of the finite-element model of the system “undermined massif – support of stope”. Geomechanical Processes during Underground Mining, 73–79. https://doi.org/10.1201/b13157-13 [CrossRef] [Google Scholar]
  13. Kyrychenko, Y., Samusia, V., Kyrychenko, V., & Goman, O. (2012). Experimental investigation of aeroelastic and hydroelastic instability parameters of a marine pipeline. Geomechanical Processes During Underground Mining: School of Underground Mining 2012, 163–167. [Google Scholar]
  14. Falshtynskyy, V., Dychkovskyy, R., Lozynskyy, V., & Saik, P. (2012). New method for justification the technological parameters of coal gasification in the test setting. Geomechanical Processes During Underground Mining, 201–208. https://doi.org/10.1201/b13157-35 [Google Scholar]
  15. Saik, P.B., Dychkovskyi, R.O., Lozynskyi, V.H., Malanchuk, Z.R., & Malanchuk, Ye.Z. (2016). Revisiting the underground gasification of coal reserves from contiguous seams, Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 60–66. [Google Scholar]
  16. Pivnyak, G., Dychkovskyi, R., Smirnov, A., & Cherednichenko, Y. (2013). Some aspects on the software simulation implementation in thin coal seams mining. Energy Efficiency Improvement of Geotechnical Systems, 1–10. https://doi.org/10.1201/b16355-2 [Google Scholar]
  17. Kovalevska, I., Barabash, M., & Snihur, V. (2018). Development of a research methodology and analysis of the stress state of a parting under the joint and downward mining of coal seams. Mining of Mineral Deposits, 12(1), 76–84. https://doi.org/10.15407/mining12.01.076 [CrossRef] [Google Scholar]
  18. Khomenko, O. (2012). Implementation of energy method in study of zonal disintegration of rocks. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 44–54. [Google Scholar]
  19. Zhanchiv, B., Rudakov, D., Khomenko, O., & Tsendzhav, L. (2013). Substantiation of mining parameters of Mongolia uranium deposits. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 10–18. [Google Scholar]
  20. Khomenko, O., Kononenko, M., & Myronova, I. (2013). Blasting works technology to decrease an emission of harmful matters into the mine atmosphere. Annual Scientific-Technical Collection – Mining of Mineral Deposits, 231–235. https://doi.org/10.1201/b16354-43 [CrossRef] [Google Scholar]
  21. Vladyko, O., Kononenko, M., & Khomenko, O. (2012). Imitating modeling stability of mine workings. Geomechanical Processes During Underground Mining, 147–150. https://doi.org/10.1201/b13157-26 [CrossRef] [Google Scholar]
  22. Khomenko, O., Tsendjav, L., Kononenko, M., & Janchiv, B. (2017). Nuclear-and-fuel power industry of Ukraine: production, science, education. Mining of Mineral Deposits, 11(4), 86–95. https://doi.org/10.15407/mining11.04.086 [CrossRef] [Google Scholar]
  23. Cook, J., Growcock, F., Guo, Q., Hodder, M., & van Oort, E. (2011). Stabilizing the wellbore to prevent lost circulation. Oilfield Review, 23(4), 26–35. [Google Scholar]
  24. Ashok Kumar Santra, B.R. Reddy, & Mfon Antia. (2007). Designing Cement Slurries for Preventing Formation Fluid Influx After Placement. International Symposium on Oilfield Chemistry, 28 February-2 March, Houston, Texas, U.S.A. SPE-106006-MS. https://doi.org/10.2118/106006-MS [Google Scholar]
  25. Fedorov, B., Ratov, B., & Sharauova, A. (2017). Development of the model of petroleum well boreability with PDC bore bits for Uzen oil field (the Republic of Kazakhstan) Eastern-European Journal of Enterprise Technologies, 3(1(87), 16–22. https://doi.org/10.15587/1729-4061.2017.99032 [CrossRef] [Google Scholar]
  26. Brazhenenko A.M., Goshovskiy S.V., & Sudakov, А.К. (2007). Tamponazh gornykh porod pri burenii geologorazvedochnykh skvazhin legko-plavkimi materialami. Kyiv: Ukrainskyi derzhavnyi heoloho-rozviduvalnyi instytut. [Google Scholar]
  27. Yu, H., Li, L., Zheng, J., Ji, W., Qin, X., Fu, X., & Gao, W. (2016). New Method of Steam Channeling Plugging in Horizontal Wells of Heavy Oil Steam Stimulation. In SPE Latin America and Caribbean Heavy and Extra Heavy Oil Conference. SPE-181173-MS. [Google Scholar]
  28. Liu, Y., Song, T., & Xu, Y. (2016). A new evaluation method for micro-fracture plugging in high-temperature deep wells and its application: A case study of the Xushen Gas Field, Songliao Basin. Natural Gas Industry B, 3(2), 158–164. [CrossRef] [Google Scholar]
  29. Sudakov, А.К., Dreus, A.Yu., Khomenko О.Ye., & Sudakova. D.A. (2017). Analitic study of heat transfer in absorbing horizon of boreholes in the formation of protection cryogenic plugging material. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 3(159), 32–46. [Google Scholar]
  30. Sudakov, A., Dreus, А., Ratov, B., & Delikesheva, D. (2018). Theoretical bases of isolation technology for swallowing horizons using thermoplastic materials. News of the national academy of sciences of the republic of Kazakhstan, 2(428), 72–80. [Google Scholar]
  31. Kuzin, J., Isakova, M., Sudakova, D., & Mostinets, О. (2017). Isolation technology for swallowing zones by thermoplastic materials on the basis of polyethyleneтеrеphthalate. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 34–39. [Google Scholar]
  32. Коzhevnikov, А.А., Dreus, A.J., Lysenko, K.Ye., & Sudakov, А.К. (2013). Research of heat transfer in cryogenic gravel filter at his transporting on barrel of drillhole. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 49–54. [Google Scholar]
  33. Dreus, A., Sudakov, А.К., & Коzhevnikov, А.А. (2016). Investigation of heating of the drilling bits and definition of the energy efficient drilling modes. Eastern-European Journal of Enterprise Technologies. Technologies, 3(7(81)), 41–46. [CrossRef] [Google Scholar]
  34. Ziborov, K.A., Protsiv, V.V., Blokhin, S.Ye., & Fedoriachenko, S.O. (2014) Applicability of computer simulation while designing mechanical systems of mining rolling stock. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), P. 55–59. [Google Scholar]
  35. Sudakov, А.К. Khomenko О.Ye., Isakova M. L., & Sudakova, D.A. (2016). Concept of numerical experiment of isolation of absorptive horizons by thermoplastic materials. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 5(155), 12–16. [Google Scholar]
  36. Protsiv, V., Ziborov, K., & Fedoriachenko, S. (2013) On formation of kinematical and dynamical parameters of output elements of the mine vehicles in transient motion. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 65–70. [Google Scholar]
  37. Dreus, A.J., Sudakov, А.К., Коzhevnikov, A.A., & Vahalin, J.M. (2016). Study on thermal strength reduction of rock formation in the diamond core drilling process using pulse flushing mode. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 3(153), 5–9. [Google Scholar]
  38. Khomenko, O.Ye., Sudakov, A.K., Malanchuk, Z.R., & Malanchuk, Ye.Z. (2017). Principles of rock pressure energy usage during underground mining of deposits. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2(158), 34–43. [Google Scholar]
  39. Kozhevnykov, A.O., Dreus, А.Yu., Baochang, Liu, & Sudakov, A.K. (2018). Drilling fluid circulation rate infuence on the contact temperature during borehole drilling. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 1(163), 35–43. [CrossRef] [Google Scholar]
  40. Franchuk, V.P., Ziborov, K.A., Krivda, V.V., Fedoriachenko, S.O. (2017). On wheel rolling along the rail regime with longitudinal load. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 62–67. [Google Scholar]
  41. Polezhaev, Yu.V., & Yurevich, F.B. (1976). Thermal protection. Moskva: Energiya. [Google Scholar]
  42. Sundén, B. (2012). Introduction to heat transfer. Southampton: WIT Press. [Google Scholar]
  43. Dreus, A.Yu., & Lysenko, K.Ye. (2016). Сomputer simulation of fluid mechanics and heat transfer processes at the working face of borehole. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 29–35. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.