Performance assessment of demand controlled ventilation controls concerning indoor VOC exposure based on a dynamic VOC emission model

Klaas  De Jonge; Arnold Janssens; Jelle Laverge

doi:10.1051/e3sconf/201911101051

All issues

Volume 111 (2019)

E3S Web Conf., 111 (2019) 01051

References

Open Access

Issue		E3S Web Conf. Volume 111, 2019 CLIMA 2019 Congress


Article Number		01051
Number of page(s)		5
Section		Advanced HVAC&R&S Technology
DOI		https://doi.org/10.1051/e3sconf/201911101051
Published online		13 August 2019

T. Salthammer, S. Mentese, and R. Marutzky, “Formaldehyde in the Indoor Environment,” Chem. Rev., vol. 110, no. 4, pp. 2536–2572, Apr. 2010. [CrossRef] [PubMed] [Google Scholar]
J. M. Logue, T. E. McKone, M. H. Sherman, and B. C. Singer, “Hazard assessment of chemical air contaminants measured in residences,” Indoor Air, vol. 21, no. 2, pp. 92–109, Apr. 2011. [CrossRef] [PubMed] [Google Scholar]
K. D. Brouwere, S. Caillou, R. Torfs, and P. Van den Bossche, “Q-INTAIR: modellering van binnenluchtkwaliteit op basis van bouwmaterialen- emissies, gebouwluchtdichtheid en ventilatie van woningen,” Sep. 2009. [Google Scholar]
K. De Jonge, “The impact of demand controlled ventilation on indoor VOC exposure in Belgian dwellings,” Master dissertation, Ghent University, 2018. [Google Scholar]
W. S. Dols and B. J. Polidoro, “CONTAM User Guide and Program Documentation Version 3.2,” National Institute of Standards and Technology, NIST TN 1887, Sep. 2015. [Google Scholar]
NBN D50-001, “Ventilatievoorzieningen in woongebouwen,” Jan. 1991. [Google Scholar]
Q. Deng, X. Yang, and J. Zhang, “Study on a new correlation between diffusion coefficient and temperature in porous building materials,” Atmos. Environ., vol. 43, no. 12, pp. 2080–2083, Apr. 2009. [Google Scholar]
W. Liang, M. Lv, and X. Yang, “The combined effects of temperature and humidity on initial emittable formaldehyde concentration of a medium-density fiberboard,” Build. Environ., vol. 98, pp. 80–88, Mar. 2016. [Google Scholar]
J. Xiong, W. Wei, S. Huang, and Y. Zhang, “Association between the Emission Rate and Temperature for Chemical Pollutants in Building Materials: General Correlation and Understanding,” Environ. Sci. Technol., p. 130709124156006, Jul. 2013. [Google Scholar]
N. Heijmans, N. Van Den Bossche, and A. Janssens, “Berekeningsmethode gelijkwaardigheid voor innovatieve ventilatiesystemen in het kader van de EPB-regelgeving,” WTCB, Ghent University, Mar. 2007. [Google Scholar]
J. Laverge and A. Janssens, “Optimization of design flow rates and component sizing for residential ventilation,” Build. Environ., vol. 65, pp. 81–89, Jul. 2013. [Google Scholar]
J. Laverge and A. Janssens, “Residential ventilation system optimization using Monte-Carlo and genetic algorithm techniques,” in ASHRAE IAQ, 16th Conference, Proceedings, 2010. [Google Scholar]
A. Janssens, L. Willems, and J. Laverge, “Performance evaluation of residential ventilation systems based on multi-zone ventilation models.,” p. 7, 2008. [Google Scholar]
S. Caillou, N. Heijmans, J. Laverge, and A. Janssens, “Méthode de calcul PER : Facteurs de réduction pour la ventilation à la demande,” p. 141, 2014. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] T. Salthammer, S. Mentese, and R. Marutzky, “Formaldehyde in the Indoor Environment,” Chem. Rev., vol. 110, no. 4, pp. 2536–2572, Apr. 2010. [CrossRef] [PubMed] [Google Scholar]

[2] J. M. Logue, T. E. McKone, M. H. Sherman, and B. C. Singer, “Hazard assessment of chemical air contaminants measured in residences,” Indoor Air, vol. 21, no. 2, pp. 92–109, Apr. 2011. [CrossRef] [PubMed] [Google Scholar]

[3] K. D. Brouwere, S. Caillou, R. Torfs, and P. Van den Bossche, “Q-INTAIR: modellering van binnenluchtkwaliteit op basis van bouwmaterialen- emissies, gebouwluchtdichtheid en ventilatie van woningen,” Sep. 2009. [Google Scholar]

[4] K. De Jonge, “The impact of demand controlled ventilation on indoor VOC exposure in Belgian dwellings,” Master dissertation, Ghent University, 2018. [Google Scholar]

[5] W. S. Dols and B. J. Polidoro, “CONTAM User Guide and Program Documentation Version 3.2,” National Institute of Standards and Technology, NIST TN 1887, Sep. 2015. [Google Scholar]

[6] NBN D50-001, “Ventilatievoorzieningen in woongebouwen,” Jan. 1991. [Google Scholar]

[7] Q. Deng, X. Yang, and J. Zhang, “Study on a new correlation between diffusion coefficient and temperature in porous building materials,” Atmos. Environ., vol. 43, no. 12, pp. 2080–2083, Apr. 2009. [Google Scholar]

[8] W. Liang, M. Lv, and X. Yang, “The combined effects of temperature and humidity on initial emittable formaldehyde concentration of a medium-density fiberboard,” Build. Environ., vol. 98, pp. 80–88, Mar. 2016. [Google Scholar]

[9] J. Xiong, W. Wei, S. Huang, and Y. Zhang, “Association between the Emission Rate and Temperature for Chemical Pollutants in Building Materials: General Correlation and Understanding,” Environ. Sci. Technol., p. 130709124156006, Jul. 2013. [Google Scholar]

[10] N. Heijmans, N. Van Den Bossche, and A. Janssens, “Berekeningsmethode gelijkwaardigheid voor innovatieve ventilatiesystemen in het kader van de EPB-regelgeving,” WTCB, Ghent University, Mar. 2007. [Google Scholar]

[11] J. Laverge and A. Janssens, “Optimization of design flow rates and component sizing for residential ventilation,” Build. Environ., vol. 65, pp. 81–89, Jul. 2013. [Google Scholar]

[12] J. Laverge and A. Janssens, “Residential ventilation system optimization using Monte-Carlo and genetic algorithm techniques,” in ASHRAE IAQ, 16th Conference, Proceedings, 2010. [Google Scholar]

[13] A. Janssens, L. Willems, and J. Laverge, “Performance evaluation of residential ventilation systems based on multi-zone ventilation models.,” p. 7, 2008. [Google Scholar]

[14] S. Caillou, N. Heijmans, J. Laverge, and A. Janssens, “Méthode de calcul PER : Facteurs de réduction pour la ventilation à la demande,” p. 141, 2014. [Google Scholar]