Open Access
E3S Web Conf.
Volume 112, 2019
8th International Conference on Thermal Equipment, Renewable Energy and Rural Development (TE-RE-RD 2019)
Article Number 03018
Number of page(s) 9
Section Rural Development
Published online 20 August 2019
  1. Eurostat 2016 [Google Scholar]
  2. Igathinathane C., Womac A.R., Sokhansanj S. Effect of Angle Cut on Corn Stalks Mechanical Cutting Strength and Energy. An ASABE Meeting Presentation, Paper number 1008644, Presentation written for presentation at the 2010 ASABE Annual, (2010) [Google Scholar]
  3. Shastri, Y.N., Miao, Z., Rodríguez, etc. Determining optimal size reduction and densification for biomass feedstock using the BioFeed optimization model. Biofuels, Bioproducts and Biorefining 8(3), DOI: 10.1002/bbb.1476, pp. 423–437 (2014) [CrossRef] [Google Scholar]
  4. [1] Altintas, Y.: Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design. 2nd ed. USA: Cambridge University Press, (2012) [Google Scholar]
  5. [2] Euan, I.G., Ozturk E., Sims N.D.: Modeling Static and Dynamic Cutting Forces and Vibrations for Inserted Ceramic Milling Tools. Procedia CIRP.8:564–9, (2013) [Google Scholar]
  6. [3] Scippa A., Grossi N., Campatelli G.: Milled Surface Generation Model for Chip Thickness Detection in Peripheral Milling. Procedia CIRP. 8:450–5 (2013) [Google Scholar]
  7. [4] Grossi N., Sallese L., Scippa A., Campatelli G.: Chatter Stability Prediction in Milling Using Speed-varying Cutting Force Coefficients. Procedia CIRP. 14:170–5, (2014) [Google Scholar]
  8. N. Grossi, F. Montevecchi, A Scippa, G. Campatelli., 3D Finiate Element Modeling of Holder – Tool Assembly for Stability Predintion in Milling, ELSEVIER -ScienceDirect, Procedia CIRP 31, pp 527–532 (2015) [Google Scholar]
  9. I. Budacan, I. Deac, Numerical Modeling of CFD model Applied to a Hammer Mill, Bulletin USAMV, serie Agriculture 70 (1), pp 273–282, (2013) [Google Scholar]
  10. Z. Y. Wu, S. Zhang, T. Gao, “Design of 3D Modelling for the New Hammer Mill Based on the SolidWorks”, Applied Mechanics and Materials, Vol. 224, pp. 320–324, (2012) [CrossRef] [Google Scholar]
  11. E. V. Kumar, Design and Analysis of Rotor Shaft Assembly of Hammer Mill Crusher, International Journal of Engineering and Management Research, Vol. 3, Issue 2, pp 22-30, (2013) [Google Scholar]
  12. Voicea I., Voicu Gh., Cardei P., Vlăduţ V., Biriş S. -A Mathematical Model of Chopped Miscanthus Briquetting Process, The 8th International Conference INTER-ENG 2014 Interdisciplinarity in Engineering, 9 -10 October 2014, “Petru Maior” University of Tîrgu Mureş, Procedia Technology (19) 2015, pages 750–757 ISSN: 2212-0173) [Google Scholar]
  13. Voicea I., Vlăduţ V., Cârdei P., Matache M., Găgeanu I., Voicu Gh., Popescu C., Paraschiv G., Kabas O -Compacting process and mathematical analysis of miscanthus briquettes expansion, Proceedings of the 43 international symposium on agricultural engineering “Actual Tasks on Agricultural Engineering”, pag. 667¸-676, ISSN 1333-2651, Opatija – Croaţia (2015) [Google Scholar]
  14. Găgeanu I., Voicu Gh., Vlăduţ V., Voicea I. -Experimental research on the influence of recipes used on the quality of biomass pellets, 16th International Scientific Conference “Engineering for rural development”, pag. 785–791, ISSN 1691-5976, 24¸26.05, Jelgava, Latvia (2017) [Google Scholar]
  15. Dincă M., Ferdeş M., Paraschiv G., Ungureanu N., Vlăduţ V., Moiceanu G., Zăbavă B. -Lignocellulosic biomass pretreatment for biofuel production, Anniversary Conference “Durable Agriculture – Agriculture of the future” Craiova, 9-10 November 2017, Annals of the UNIVERSITY OF CRAIOVA -AGRICULTURE, MONTANOLOGY, CADASTRE, Series, Vol. 47, No. 2 / 2017, Working Group No. 4 -MANAGEMENT, AGRICULTURE MECHANIZATION AND CADASTRE, pp. 310–316, ISSN 1841-8317, ISSN CD-ROM 2066-950X (2017); [Google Scholar]
  16. Găgeanu I., Chiţoiu M., Găgeanu G., Vlăduţ V., Voicu Gh., Bunduchi G., Grigore I. -Aspects on obtaining the raw material for pelletizing, Scientific International Conferences -The 12th ANNUAL MEETING “DURABLE AGRICULTURE – AGRICULTURE OF THE FUTURE” Craiova, 17-18 November 2016, ANNALS OF THE UNIVERSITY OF CRAIOVA -AGRICULTURE, MONTANOLOGY, CADASTRE, Series, Vol. 46, No. 2 / 2016, Working Group No. 4 -Management, Agriculture Mechanization and Cadastre, pp. 379–382, ISSN 1841-8317, ISSN CD-ROM 2066-950X (2016) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.